EnviroBind is a renewable resource based one-component moisture cured polyurethane adhesive.

[custom_headline level=”h2″ looks_like=”h4″ class=”mtl mbm”]Basic Uses[/custom_headline]

EnviroBind is intended for bonding many substrates to the backing material of synthetic grass, during the splicing process on putting greens, athletic fields, playgrounds, and other sporting applications.

[custom_headline level=”h2″ looks_like=”h4″ class=”mtl mbm”]Safety Guidelines[/custom_headline]

Always wear the recommended personal protective equipment. Avoid contact with eyes, skin, and clothing. Adequate ventilation is required during the application process. Refer to the SDS for further handling and safety instrustions.

[custom_headline level=”h2″ looks_like=”h4″ class=”mtl mbm”]Storage and Packaging[/custom_headline]

EnviroBind should be kept dry and cool in original packaging. Do not expose containers to open flame, excessive heat, or direct sunlight. EnviroBind is packaged at 17 kg (approximately 4.2 gallons).

[custom_headline level=”h2″ looks_like=”h4″ class=”mtl mbm”]Coverage[/custom_headline]

The consumption rate is 55-65 sqft gallon (6” spread width x 1/16” thick)

[custom_headline level=”h2″ looks_like=”h4″ class=”mtl mbm”]Installation Guidelines[/custom_headline]

Note: Make sure adhesive and surface are at 45°F (7°C) or above for 48 hours before, during, and 48 hours after installation.

Before application, the surface must be sound, smooth, dry, clean, and free of excessive moisture or alkali. Remove dirt, wax, loose paint, and all other foreign matter that would interfere with a good bond such as curing agents and sealers.

[custom_headline level=”h2″ looks_like=”h4″ class=”mtl mbm”]Features & Benefits[/custom_headline]

  • Non-Foaming
  • Non-Flammable
  • Eco Friendly
  • 67% Renewable Resources
  • 22% Soybean Oil
  • Zero VOC
  • One Component
  • Excellent adhesion to various substrates

[custom_headline level=”h2″ looks_like=”h4″ class=”mtl mbm”]Limitations[/custom_headline]

  • Do not apply over wet substrates
  • Substrate and application minimum temperature: 45°F (7°C)
  • Substrate and application maximum temperature: 104°F (40°C)
  • Permissible relative humidity: 40-90%

[gap size=”3em”]
[share title=”Share this Product” facebook=”true” twitter=”true” google_plus=”true” linkedin=”true” pinterest=”true” email=”true”]

Additional information


0 g/L*

Renewable Content


Soybean Content


Specific Gravity

1.00 – 1.10 g/cm3


10,000 – 14,000 cps



Pot Life

20 – 40 minutes